Jailbreak Iphone Ios 10.0 2

Luca Todesco just announced the first beta build of his Yalu jailbreak for iOS 10.0-10.2. In this guide, I'll walk you through how to use the tool, should you want to try out the beta.

Bear in mind, this tool isfirst release and is not necessarily stable. It also does not support all devices yet.Whilst Todesco has said that it should already be more stable than the betas of Yalu for 10.0-10.1.1, a first build is a first build. Proceed at your own risk.

I personally gave the tool a quick test and then restored to stock iOS 10.2 to wait for a later build. This is not because the build I tried was unstable for me, but because I didn't want to install the builds over each other, preferring to wait for a more final release with a clean slate. If you are cautious like me and value the possibility of a stable future jailbreak, consider this option, or not installing at all for now.

Requirements

An iPhone 6s(+), iPhone SE, or iPad Pro, running iOS 10.0-10.2
No other devices are supported yet, do not try! All 64-bit devices will be supported eventually.
Cydia Impactor app for Mac, Windows, or Linux.
The Yalu beta application, in .ipa format.

Instructions

Subscribe to iDB's YouTube channel

1) Download Cydia Impactor to your computer.

2)Download yalu102 Beta to your computer.

3)Launch Cydia Impactor and connect your device to your computer.

4)Drag theyalu102.ipaontoCydia Impactorto load it up, and hitStart.

5)Enter your Apple IDwhen prompted.

6)a) If you don't have two-step verification turned on for your Apple ID, enter yourApple ID passwordwhen prompted.

6)b)If you do have two-step verification turned on for your Apple ID, you must log in to the Apple ID website, and create an app-specific password. Enter that password into Impactor instead of your normal password.

7)OnceImpactorhas completed installing the .ipa, look to your device and check that theyalu102app has appeared on your Home screen.

8)Open theSettingsapp on your device, and navigate toGeneral – Device Management.

9)Select the profile named after the Apple ID you entered into Impactor, and inside you should see the yalu102 app listed. Press theTrust button to trust this app on your device. If you do not do this, it will not run.

10)Once you have trusted the app, return to your Home screen and launch theyalu102app.

11)Press theGobutton to jailbreak your device, and wait.

12)Your device should respring, and then theCydiaapp should have appeared on your Home screen.

If this does not happen, check the profile is still trusted, reboot, and run the yalu102 app again.

13)Launch Cydia, and install any recommended upgrades.

14)Once this is done, add the following repository to Cydia:

http://apt.saurik.com/beta/cydia-arm64/
This will ensure you receive beta updates for the Cydia app itself. However, you will have to install updates for theyalu102app manually for now by following the steps of this guide, rather than through Cydia.

That's all folks!

If you have had enough of the beta jailbreak and want to remove it for now to wait for stable, follow the instructions below.

Removing yalu102

While iOS 10.2 is still signed

Simply restore your device to iOS 10.2 in iTunes, by manually downloading the iOS 10.2 IPSW, alt-clickingRestorein iTunes (shift-clicking onWindows), and selecting the IPSW you downloaded.

Check that iOS 10.2 is still being signed before doing this! If it is not, you will be forced to update to iOS 10.2.1+, and you will be stuck. This is only the best way for at most a few more days. Check signing status before doing this!

Once iOS 10.2 is no longer signed

1)Uninstall all your Cydia tweaks and apps.

2)Delete theyalu102application from your device.

3)Ensure the trusted profile has gone fromSettings – General – Device Management.

4)Reboot your device.

5)Put Cydia in a folder and do not launch it.

6)That's the best you can do.

This will not remove all jailbreak files from your device, but it will disable your jailbreak and will let you install a later build of the jailbreak tool when you decide to try it again. To completely remove all files, you must update to the latest firmware, but then you can not jailbreak again.

Conclusion

It's really up to you as to whether you want to try out the Yalu jailbreak at this stage. Luca Todesco has posted the .ipa publicly himself, and requested feedback, which he never wanted or requested on the 10.1.1 version of the tool. This implies that, to some extent, he considers it acceptable for general use. Substrate is enabled for example, and Cydia no longer freezes upon respringing.

However, the fact remains that as an alpha release, it is only going to get more stable with time, and that if you encounter any problems using this build, you will not get much sympathy from anyone. So for the two weeks you might have to wait for a stable version of the tool, is it really worth the risk of pushing ahead with an early release?

You decide.

Jailbreak Iphone Ios 10.0 2

Source: https://www.idownloadblog.com/2017/01/26/jailbreak-ios-10-1-x-yalu/